BRAINFPV RADIX 2 HD H7 FLIGHT CONTROLLER

BRAINFPV RADIX 2 HD H7 FLIGHT CONTROLLER - Image 2

BRAINFPV RADIX 2 HD H7 FLIGHT CONTROLLER - Image 3

BRAINFPV RADIX 2 HD H7 FLIGHT CONTROLLER - Image 4

BRAINFPV RADIX 2 HD H7 FLIGHT CONTROLLER - Image 5

BRAINFPV RADIX 2 HD H7 FLIGHT CONTROLLER

Name: BRAINFPV RADIX 2 HD H7 FLIGHT CONTROLLER
SKU: 1409
Availability: OutOfStock

₹20,533.00

Out of stock

H7 based flight controller for HD (digital) FPV systems

Includes:

RADIX 2 HD flight controller
Silicone anti-vibration grommets 4x
BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)
5-pin cable for motor outputs 5 to 8
6-pin cable for custom HD system connection (for DJI, the cable included with the Air Unit can be directly connected to the RADIX 2 HD)
Stickers

UNPARALLELED FLIGHT PERFORMANCE

MADE FOR ADVANCED X8 CINELIFTERS

BrainFPV’s RADIX 2 HD is an evolution of the legendary RADIX 2 flight controller

BLAZING FAST

H7 PROCESSOR

PERFECT PRECISION

BMI270 GYRO

HD & DUAL 4-in-1 ESC

PLUG & PLAY

ADD TO CART

NDAA COMPLIANT!

MADE IN THE U S A

BrainFPV couldn’t be more proud to support our local economy by manufacturing our products in Portland, Oregon USA!

RADIX 2 HD FEATURES & SPECS

Powerful processor: STM32H750 processor running at 480 MHz with 1 MB RAM
Superior gyro: Bosch Sensortec BMI270 gyro / accelerometer delivering superior flight performance you are used to from the RADIX 2
Accurate barometer: Infineon DPS310 providing accurate altitude information
Designed for HD FPV: Compatible with all digital HD FPV systems currently available, plug-and-play connector for DJI HD FPV system
8S compatible: Can be powered directly from up to 8S (35 V) battery voltage
12S voltage sensing: When used with more than 8S, it can still measure the battery voltage, but needs to be powered using a lower voltage (e.g. 12 V)
16 MB built-in flash memory: For firmware, flight logs, and settings storage
Micro SD card slot: Provides even more space for storing flight logs
BrainFPV bootloader for driverless flashing: Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers. Can also be used for downloading logs from the Micro SD card
8 motor outputs: All outputs are available on connectors for single or dual 4-in-1 ESC connection. Bi-directional DSHOT for RPM filtering is supported on all outputs
2 servo outputs: In addition to the 8 motor outputs, the UART6 pads can be configured to be servo outputs

6 ½ serial ports (UARTs): 6 full ports and one RX-only port for HD system RC control connection. All with integrated inverters for S-BUS and other inverted protocols
I2C port for external sensors
CAN bus port for future extensibility (not currently supported in Betaflight and INAV)
RGB status LED with customizable color
RGB LED output
Buzzer output
Analog current sensor input
Analog RSSI input
5 V / 1.5 A regulator for powering the RADIX 2 HD itself and other 5 V devices (RC receiver, GPS, etc.)
9 V / 2.0 A regulator with pit switch for HD system: The pit switch allows you to turn off the HD system to keep it cool before take off
Spike protector (TVS diode) to prevent damage from voltage spikes
USB Type-C connector
Size: 37 x 37 mm (30.5 mm hole spacing)
Weight: 7g
Supported firmware: ArduPilot, Betaflight, INAV
Made in the USA, NDAA compliant

THE DIFFERENCES

RADIX 2 HD vs. RADIX 2

BRAINFPV’S RADIX 2 HD and RADIX 2 share a lot of similarities. For example, they both use the same blazing fast H7 processor and BMI270 gyro, and both include a plug-and-play connector for dual 4-in-1 ESC’s. Both FC’s deliver unparalleled flight performance. Here are the differences between the two:

Designed to be used with HD systems: No analog OSD
Improved voltage regulators and filtering
Micro SD card slot
CAN bus port
Plug-and-play connector for HD systems
ArduPilot Support