• View as:
  • Sidebar
  • Sort by:
Modules
499 (+18% GST)

AVAILABILITY: In stock

499 (+18% GST)

QUICK  OVERVIEW

  • Holding force: 0.25kg
  • Energized forms: intermittent
  • Unlocking time: 1S
  • Dimensions: 54 x 42 x 28 mm (LxWxH)
  • High quality ultra-compact electric lock.
  • Rustproof, durable, safe, convenient to use.
  • Suction which tightly sucks the iron, thus locking the door.
HOLI SALE
SALE -23%
299 230 (+18% GST)

AVAILABILITY: In stock

299 230 (+18% GST)

QUICK OVERVIEW

  1. 3-axis magnetic electronic compass.
  2. Precise heading information.
  3. Operating Voltage: 3 -5 V DC.
  4. Driver Chip: HMC5883L.
  5. Communication: I2C protocol.
  6. Measuring range: ± 1.3-8 Gauss.
389 (+18% GST)

AVAILABILITY: In stock

389 (+18% GST)

QUICK OVERVIEW:

  • Fully Compatible with Both the Model A and Model B Raspberry Pi
  • 5 MP Omnivision 5647 Camera Module
  • Size: Approx. 25 x 24 x 9 mm /0.99 x 0.95 x 0.36 inch
189 (+18% GST)

AVAILABILITY: In stock

189 (+18% GST)

QUICK OVERVIEW

  • Combination of 3 axis accelerometer and 3 asis gyroscope
  • LSM6DS3 digital chip is used
  • This product features the tilt , motion and tap sensing
SALE
279 (+18% GST)

AVAILABILITY: In stock

279 (+18% GST)

QUICK OVERVIEW

  • A transparent wireless connection setup
  • It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature)
  • Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband.
SALE
SALE -28%
109 79 (+18% GST)

AVAILABILITY: In stock

109 79 (+18% GST)

QUICK OVERVIEW

  • Output Digital: 0V to 5V, Adjustable trigger level from preset
  • Operating Voltage: 3V to 5V DC
  • Operating Current: 15ma
  • LM393 based design
  • Can detect ambient brightness and light intensity
  • Adjustable sensitivity (via blue digital potentiometer adjustment)
ESPM Choice
SALE -6%
69 65 (+18% GST)

AVAILABILITY: In stock

69 65 (+18% GST)

Description:-

Laser Diode Module is a breadboard friendly, low cost having wavelength of 650nm and operating voltage of 5V. The laser head is composed of a light-emitting tube, condenser lens and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5v dc power supply. Pay attention to the laser cell to prevent from being burnt or battery explosion due to a short circuit when removing the battery.

89 (+18% GST)

AVAILABILITY: In stock

89 (+18% GST)

QUICK OVERVIEW

• The driver motor is based on L293D.
• Male burg-stick connectors for supply, ground and input connection.
• Screw terminal connectors for easy motor connection.
• L293D IC works on the basic principle of H-bridge
• By using L293D we can control two motors
• Voltage(VDC): 4.5 to 12
• Peak Current (A): 600 mA
• No. of Channels: 1

169 (+18% GST)

AVAILABILITY: In stock

169 (+18% GST)

QUICK OVERVIEW

  • Drive a 2-phase bipolar stepper motor or two DC motors with the L298 dual H-Bridge chip, mounted on this handy breakout board along with all necessary peripherals
  • It is ideal for robotic applications and well suited for connection to a microcontroller requiring just a couple of control lines per motor
  • It can also be interfaced with simple manual switches, TTL logic gates, relays, etc.
  • Weight: 30 gms
  • can also control the 2-phase stepper motor
169 (+18% GST)

AVAILABILITY: In stock

169 (+18% GST)

QUICK OVERVIEW

  • L293D Motor Driver is 16 pin IC which can control a set of two DC motor and in any direction
  • 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  • Can run motors on 4.5VDC to 25VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • down resistors keep motors disabled during power-up
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power
  • 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  • Weight 25gms
New
89 (+18% GST)

AVAILABILITY: In stock

89 (+18% GST)

PL2303 – USB to TTL Serial UART Converter Module is a handy, low cost module. Adopt imported controller RS232 TTL, which can stabilize the flash with high-speed 500mA self-recovery fuse for protection.

Two data transmission indicator can monitor data transfer status in real time. Reserve 3.3V and 5V pin interface, easy for DDWRT of different voltage system that needs power. The entire board is coated by a high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside, so that the board won’t be burnt down by a material shortcut.

69 (+18% GST)

AVAILABILITY: In stock

69 (+18% GST)

QUICK OVERVIEW

  • Number of Channel: 1 channel
  • Maximum load: AC- 250V/10A,  DC -5V/10A
  • Working voltage: 5V
  • Trigger current: 5mA
  • Power supply indicator lamp
  • Module size: 50 x 26 x 18.5mm (L x W x H)
119 (+18% GST)

AVAILABILITY: In stock

119 (+18% GST)

QUICK OVERVIEW

  • Number of Channel: 2 channel
  • Maximum load: AC- 250V/10A,  DC-5V/10A
  • 2 LEDs to indicate when relays are on
  • Module size: 50.5 x 38.5 x 18.5mm (L x W x H)
  • Weight: 31g
189 (+18% GST)

AVAILABILITY: In stock

189 (+18% GST)

QUICK OVERVIEW

  • Number of Channel: 4 channel
  • Relay Operating Voltage: 5V
  • Power supply indicator and Control indicator lamp
  • Module size: 74 x 44 x 18.5mm (L x W x H)
  • Weight: 55g
389 (+18% GST)

AVAILABILITY: In stock

389 (+18% GST)

QUICK OVERVIEW

• Number of Channel: 8 channel
• Maximum load: AC- 250V/10A, DC -5V/10A
• Relay Operating Voltage: 5V
• Module size: 138 x 56 x 18.5mm (L x W x H)
• Weight: 100g

  • Showing 1–15 of 20 results